Back

Claas-tractors

To Deutz-Fahr-tractors

To John Deere-tractors

To New Holland-tractors

SAUTER - Front linkage for Claas-tractors:

All parts are adapted to the respective tractor type right from the drawing board.
Firm side rails allow the use of heaviest front implements.
Two double-acting cylinders and a sophisticated kinematic mechanism
guarantee straight-through lifting power trans-mission (see technical data)
- please note the admissible front axle loads of the tractor

Maximum angle of turn and ground clearance of the tractor are maintained.
The strong bottom links are pivot able upwards and removable without any tools.
A generously dimensioned float adapter which can be locked easily and without
any tools makes for optimum adjustment to surface conditions for all front-end
implements:
1. Single-acting
2. Double-acting (for implements requiring lifting and pressing)
3. Locking of lifting and lowering
(safe transport, no unintended lowering of the front-end implement possible)

Hydraulic conduits up to the control unit.
Integrated shunt coupling in favorable position in series.
All points of rotation can be lubricated.
Front linkage is well integrated in tractor contours.
Easy and time-saving assembly.
A wide range of options completes the Standard delivery program

SAUTER - Front PTO:

Well integrated in tractor contours.
Designed for maximum continuous stress.
Multiple-disc clutch running noiselessly in an oil bath.
Smooth start-up characteristics for all front-end implements.
Switch-on and -off by an electric push-button.
Front PTO gear with integrated clutch is a complete unit with its own
oil-pressure supply and therefore independent from the hydraulic system
of the tractor.
Retrofitting without any problem.
Easy and time-saving assembly.
Including complete mounting kit.

Easy-reading user manuals and mounting instructions with spare parts lists accompany the shipment.

Options:

Telescopic top link cat. 2.
Tractor triangle cat. 2.
Auxiliary head lights.
Hydraulic accumulator
Pressure-control unit
(only if tractor is fitted with a load sensing pump)
Holders for mower relief springs.

Attention!

Admissible front axle loads nor gross vehicle weight nor maximum drive speeds of tractor model specified by Claas must not be exceeded.

All details given and illustrations herein are approximate only
and quoted without engagement. Subject to modifications.

TECHNICAL DATA/ STANDARD DELIVERY	Celtis 426-456	Ares 540-550 546-566	Ares 610-630,640* 616-636,696*	Ares 715-725 816-836
Front linkage cat.	2	2	2	2
Lifting power at catch hook kN(kg)	30(3000)	35(3500)	40(4000)	50(5000)
Straight-through lifting power at implement center of gravity 800mm from coupling points (kN)(kg)	18(1800)	20(2000)	24(2400)	33(3300)
Double-acting cylinders	standard	standard	standard	standard
Reversing valve	standard	standard	standard	standard
Catch hooks	Walterscheid cat. 2	Walterscheid cat. 2	Walterscheid cat. 2, cat. 3L*	Walterscheid cat. 3L
Top link	cat. 2	cat. 2	cat. 2	cat. 2
Top link support	standard	standard	standard	standard
Front PTO shaft speed (rpm) Sense of rotation	1000/ rightward in driving direction	1000/ rightward in driving direction	1000/ rightward in driving direction	1000/ rightward in driving direction
Max. PTO power kW (HP)	74(100)	125(170)	125(170)	125(170)
Max admissible power kW (HP)	55(75)	110(150)	110(150)	110(150)
PTO shaft profile DIN 9611	1 3/8"	1 3/8"	1 3/8"	1 3/8"

Removable and pivot able without any tools, float adaptor for bottom links.

Information about the series CERGOS en TEMIS on request!

For detailed information concerning new models see also downloads

To Downloads

SAUTER Front linkage and front PTO are also deliverable for:

Make your choice:
Deutz-Fahr-tractors

John Deere-tractors

New Holland-tractors

Back